Street pole-top 416x211mm

All Street

Lighting Effects

Application imagery for Street pole-top 416x211mm

Product Details

Urban lighting system intended for use with LED light sources.
Installation on poles with side arms or whip-like terminal parts from ø 42 to ø 76 mm.
Optical compartment in die-cast aluminium; hot dip galvanised steel tubular arms; sodium-calcium tempered protection glass, with 5 mm thickness.
No upwards dispersion of the luminous flux.
Adjustable optical compartment.
High visual comfort.
High yield optics (Opti Smart Lens) (with polymer optic lenses and uniform light distribution).
No photo-biological risks . This luminaire is in the “Exempt Group” (no risk linked to infra-red, blue light and UV radiation) in accordance with the EN 62471:2008 standard.
The Street luminaire including terminal can be programmed as DALI-MIDNIGHT-ON / OFF via the interface used to set the luminous flux or via NFC.
The Street luminaire supplied with outgoing cable but terminal not included can be programmed only with the MIDNIGHT (NO DALI) profile via NFC.
Over voltage surge protection: 10kV in Common Mode (CM), 6kV in Differential Mode (DM).
All external screws used are in A2 Compositions single arm L=900 with intermediate arms L=900 (double installation) pole with single arm pole with double arm tapered curved pole with intermediate fitting tapered curved pole Pole-top Shaped poles double pole-top single pole-top triple pole-top wall attachment Arms iguzzini.com/street stainless steel.
Product equipped with sigle or double Zhaga 4-Pin connection.
Product equipped with Nema 7-PIN Dali Fitting complete with protective cap.
The BLE - DALI interface means that all DALI products can be managed via Bluetooth Low Energy (more information).
Dark Sky Approved: the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following:
- Maximum Correlated Color Temperature of 3000K.
- Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone.
- Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed.
- Luminaires must have dimming capability to 10% full rating.