Product code
EP83
iPro
EP83: Spotlight with bracket - Warm White LED - DALI - Flood optic
Technical description:
Floodlight designed to use Warm White LED lamps with a Flood optic. Can be installed at ground level, on walls (using screw anchors) and on pole mounting systems. The luminaire consists of an optical assembly/component-holding box and hidden fixing bracket. The optical assembly and front frame are made of die-cast aluminium alloy painted with a smooth finish (grey RAL 9007) or a textured finish (white RAL 9016). The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The next painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The tempered sodium-calcium glass cover has customised serigraphy, is 5mm thick, and joined to the frame with silicone. The frame is fastened to the optical assembly by captive M5 AISI 304 stainless steel screws and a galvanised steel safety cable. The product comes complete with a Warm White colour, monochrome LED circuit, an optic with a 99.93% super-pure aluminium Opti Beam Reflector reflector with a polished, anodized surface and built-in electronic ballast. The component-holding box, in the rear of the luminaire, is set up to hold the control gear, which is fixed with captive screws on a galvanised steel pull-out plate. The control gear can be accessed through the rear door made of painted aluminium alloy, fixed to the product body with four M5 AISI 304 stainless steel captive screws and a safety cable. iPro can be adjusted +95°/ -5° relative to the horizontal line using a bracket made of extruded aluminium, on which a graduated scale (with 15° steps) is marked using serigraphy. The internal silicone seals guarantee watertightness IP66h Set up for pass-through wiring using a double M24x1.5 nickel-plated brass cable gland (suitable for cables with 7÷16mm diameter). All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Installation:
Ground, wall or ceiling installation using special bracket. Secure using screw anchors for concrete, cement and solid brick. It can also be installed on a MultiPro pole system using suitable accessories.
Colour:
White (01) | Black (04) | Grey (15) | Rust Brown (F5)
Weight (Kg):
6.3
Mounting:
wall arm|pole arm|ground surface|wall surface|ground anchored|ground spike|ceiling surface|u-bracket
Wiring:
Control gear complete with dimmable DALI electronic ballast.
Notes:
Overvoltage protection: 10KV Common Mode and 6KV Differential Mode.
Class II;960°C;IK07;IP66
CE;UKCA;ENEC-03;BIS;EAC;QCERT;NOM;IRAM
Product configuration: EP83
EP83: Spotlight with bracket - Warm White LED - DALI - Flood optic
Product characteristics:
Total lighting output [Lm]: 5111
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 45.3
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 112.8
Voltage [V]: 230
Life Time: 100,000h - L90 - B10 (Ta 25°C)
Life Time: 100,000h - L90 - B10 (Ta 40°C)
Intervallo temperatura ambiente: from -30°C to 50°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 81
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 5.3
Nominal power [W]: 40
Colour temperature [K]: 3000
Nominal luminous [Lm]: 6310
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: 32°
MacAdam Step: 2