Product code
Q737
Master Pro Evo KNX
Q737: KNX Ambient Controller touch 2.8"
Technical description:
Touch Ambient controller that controls up to 32 functions (max) and the ambient temperature.
All the functions are displayed on a touchscreen and can be recalled 
with simple finger movements. The user can choose between 3 different interfaces that can be 
freely assigned to control functions. The ambient temperature can
be controlled in 2 different ways.
With an ambient thermostat, a display and a remote sensor connection.
The ambient thermostat can be used for heating and cooling with 
continuous adjustment KNX valve controls or for activating switching and heating actuators.
Extra device functions that can be programmed in ETS:
User interface switch on behaviour
Proximity function: the display and home screenpage become visible only when a person approaches
Gesture function: the device recognises certain gestures (a horizontal or vertical movement) and activates the corresponding functions. This means that a light can be turned on, for example, when 
someone walks into a room.
Cleaning mode: for a certain period of time, neither touches or gestures are detected
Background illumination adjustment
Screensaver setting
With integrated bus coupler. The bus is connected via a connecting terminal on the bus.
KNX software functions:
Command unit/button:
Switching, ON/OFF, dimming (single/double surface), shutters
(single/double surface), impulse limits for activating 1, 2, 4 or 8 bit telegrams, impulse limits with 2 byte telegrams, 8 bit linear regulator, scenario recall, scenario save, indication function, fan check, operating modes, ambient thermostat functions setpoint adjustment:
Type of controller: On/Off control, continuous PI control, switching PI control
(PWM)
Output: continuous in 0 range... 100% or alternate ON/OFF
Controller mode:
Heating with one controller output only
Cooling with one controller output only
Heating and cooling with separate controller outputs
Cooling On/Off with 2 control outputs
Cooling On/Off with 2 control outputs
Heating and cooling On/Off with 4 control outputs
Operating modes: comfort, comfort extension, standby (ECO), night dimming,
frost/heat protection
Edit all setpoints. Save all temperature and operating mode setpoints
in event of reset. Monitoring external temperature. Extra output for control 
value as 1 byte on PWM.
Effective temperature indication function, valve protection function.
Scenarios function.
Control: touchscreen
Accessories: Frame code Q738, case for recess code ML15
Note: can be programmed with ETS4 and above.
Supplied with: bus connecting terminal and supporting plate.
Colour:
Black (04)
Notes:
<br>For system composition info, please contact iGuzzini
Class III;IP20
EAC